Reverse Osmosis for Waste Water Recycle/Reuse

Graver’s Reverse Osmosis Systems are pre-engineered to economically reduce total dissolved solids (TDS) by removing dissolved minerals, particles, and organic impurities. When used in conjunction with Graver supplied pretreatment equipment such as clarifiers, filters and chemical feeds, the Graver Reverse Osmosis Systems provide an economical means for treating wastewater for recycle and reuse within your plant.  Freshwater sources are dwindling and the cost are increasing as your needs complete for the same water used for municipal drinking.

We can help you determine if RO is the best solution for your plant and provide a custom designed system for your application.

Typical Applications

  • Boiler Water Make-Up Reject Recycle
  • Cooling Tower Make-Up Recycle
  • Cooling Tower Blow Down Recycle
  • Cooling Tower Side Stream Recycle
  • Wastewater Treatment

Standard Design Features

    • Programmed electronic microprocessor
    • Permeate TDS meter
    • Digital display flow meters
    • Corrosion-resistant cartridge prefilter housing
    • Stainless steel vertical centrifugal pump
    • Liquid-filled, stainless steel pressure gauges
    • High pressure piping: 316L SS sch.# 40
    • Low pressure piping: PVC sch.#80
    • Membrane vessels: FRP, side-ported
    • TFC 8”x40” high rejection BW membranes
    • High pressure switch
    • Nema-4 electric enclosure
    • Low pressure safety switch
    • Automatic inlet shut-off valve
    • 460V/60HZ/3PH, TEFC motor
    • Frame: Welded steel, powder coated
    • High pressure valves: 316 stainless steel
    • Emergency stop
    • Sample valves
    • Cleaning ports

Optional Design Features

    • Upgrade pump to 316SS
    • Chemical dosing systems
    • Automatic Fast Flush
    • PLC (Programmable Logic Controller)
    • pH meter
    • ORP meter
    • Nano-filtration membranes
    • Cold water membranes
    • Recycle flow meter
    • Integrated cleaning station (CIP)
    • 50 HZ system
    • High TDS Diversion

ROFlex table

Photo Gallery

 

Reverse Osmosis for Waste Water Recycle/Reuse

Graver’s Reverse Osmosis Systems are pre-engineered to economically reduce total dissolved solids (TDS) by removing dissolved minerals, particles, and organic impurities. When used in conjunction with Graver supplied pretreatment equipment such as clarifiers, filters and chemical feeds, the Graver Reverse Osmosis Systems provide an economical means for treating wastewater for recycle and reuse within your plant.  Freshwater sources are dwindling and the cost are increasing as your needs complete for the same water used for municipal drinking.

We can help you determine if RO is the best solution for your plant and provide a custom designed system for your application.

Typical Applications

  • Boiler Water Make-Up Reject Recycle
  • Cooling Tower Make-Up Recycle
  • Cooling Tower Blow Down Recycle
  • Cooling Tower Side Stream Recycle
  • Wastewater Treatment

Standard Design Features

ROFlex table

Photo Gallery